Copper Interface 
1 x 10/100/1000BASE-T RJ45 port (Auto-MDI/MDI-X) twisted pair

Fiber Interface 
1 x 100/1000BASE-X SFP Slot

Reset Button 
< 10 sec: System reboot
> 10 sec: Factory default

ESD Protection 
6KV DC

Enclosure 
Compact-sized metal case
Installation Wall mountable
Media convert Chassis installation
Optional DIN-rail kit

Dimensions
(W x D x H) 94 x 70 x 26mm
Weight 201g (device only)

Power Input 
DC 5V, 2A
Power Consumption 3.4 watts/11.6 BTU (maximum)

LED Indicator 
PWR, (Green)
TP LINK/ACT, 1000 (Green)
Fiber LINK/ACT (Green)

Network Cables 
10/100/1000BASE-T:
10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100 m
100BASE-TX: 2-pair UTP Cat. 5, up to 100 m
1000BASE-T: 4-pair STP Cat 5 up to 100m
100/1000GBASE-SX/LX:
50/125µm or 62.5/125µm multi-mode fiber cable, up to 220/550m.
9/125µm single-mode cable, extending long distance to 10/20/40/60/80/120km (vary on
fiber transceiver or SFP module)

Switching Specifications
Switch Processing Scheme Store and Forward
Fabric 4Gbps
Throughput (packet per second) 2.98Mpps@64bytes
Address Table 1K entries, automatic source address learning and aging
Flow Control Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Jumbo Frame 16K
Shared Buffer 512Kb

Layer 2 Function
Port Configuration Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Port Status Display each port’s speed duplex mode, link status, flow control status,
auto negotiation status
VLAN IEEE 802.1Q tag-based VLAN
IEEE 802.1ad Q-in-Q tunneling
Up to 16 VLAN groups, out of 4094 VLAN IDs
Management VLAN
Bandwidth Control Per port bandwidth control
Ingress: 1~1000,000Kbps
Egress: 1~1000,000Kbps
QoS Traffic classification based, strict priority and WRR
8-level priority for switching
Traffic classification:
802.1p priority
IP DSCP
IP Address

Security Function
Access Security Remote management protocols control by SSH, Telnet, HTTP ans HTTPs
System Management
Basic Management Interfaces Telnet; Web browser; SNMP v1, v2c
Secure Management Interfaces SSHv2, TLS v1.2, SNMP v3
System Management Firmware upgrade by HTTP protocol through Ethernet network
Configuration upload/download through HTTP
LLDP protocol
NTP
PLANET Smart Discovery Utility
PLANET CloudViewer app
Event Management Remote syslog
Local system log
SNMP trap
Standards Conformance
Regulatory Compliance FCC Class A, CE Class A
Standards Compliance IEEE 802.3, 10BASE-T
IEEE 802.3u, 100BASE-TX/FX
IEEE 802.3ab, 1000BASE-T
IEEE 802.3z, 1000BASE-SX/LX
IEEE 802.3x full-duplex flow control
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1ad Q-in-Q VLAN stacking
IEEE 802.1ab LLDP
IEEE 802.3ah OAM
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP

Environment
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)