Planet IPOE-162S 
Industrial IEEE 802.3at Gigabit High Power over Ethernet Splitter
 

Overview
 

The Best Industrial Grade Data Link and Power Sourcing for Non-PoE Solution
The IPOE-162S is an Industrial High Power PoE Splitter that can split the 48~56V DC over the existing Ethernet cable into the selectable 12V or 24V DC power output. It supports passive 10/100/1000Mbps Ethernet connection ability and complies with IEEE 802.3at High Power over Ethernet standard that supports up to 25 Watts output power to powered device. To fulfill the growing industrial applications, the IPOE-162S is designed to work under the operating temperature range from -40 to 75 Degree C (-40 to 167 Degree F). The IPOE-162S is an ideal solution to transfer power to traditional network device with high power demand directly without the need to install additional power outlets and electrical cabling in the industrial environment.

 

Innovative Selectable DC Power Output Voltage
Via the innovative 12 volt / 24 volt DIP switch on the front panel, the IPOE-162S can supply either 24V DC power to industrial equipment or 12V DC output to the common network devices, such as wireless Access Point or IP camera. It highly increases the flexibility of the product applications.

 

Dual Power Output Capability
By supporting up to 25 Watts 802.3at Power over Ethernet cable, the IPOE-162S can satisfy not only single power-hungry equipment but also able to share the 25 Watts output power to two non-PoE Ethernet devices simultaneously through a 4-Pin terminal block. For example, the two power output can be applied as below to completely solve the need of electric source:
¦ IP Camera (Power 1) + Outdoor housing with fan and heater (Power 2)
¦ IP Camera (Power 1) + Pan & Tilt Motor (Power 2)
¦ Analog Camera (Power 1) + IP Video Server (Power 2)  

  
Environmentally Hardened Design
With compact, slim type IP30 industrial case protection, the space saving Industrial High Power PoE Splitter IPOE-162S can be placed in almost any difficult environment. It allows either DIN rail or wall mounting for efficient use of cabinet space. Being able to operate under the temperature range from -40 to 75 Degree C, the IPOE-162S is the ideal product for co-working with Industrial High Power Injector which can feed the power to Non-PoE devices up to 100 meters (328 feet) away on those harsh environments.  
  
Plug and Play, Easy Cabling Installation
With IEEE 802.3at Gigabit High Power over Ethernet devices installed, the system administrator only has to use one single RJ-45 Ethernet cable to carry both power and data to each device. Besides, connect through the Industrial High Power PoE Injector with the IPOE-162S, you could also have benefits including cost saving, easy networking planning and high network reliability.  

Key Features
 
Interface
• 2-Port RJ-45 interfaces
– 1-Port PoE Power+ Data input
– 1-Port Data output
– 2 DC out (4 Pin Terminal Block)
?
Power over Ethernet Splitter
• Complies with IEEE 802.3at High Power over Ethernet, PD
• Splits the 48~56V DC power over RJ-45 Ethernet cable into DC 12V / 24V output
• Auto-detect of IEEE 802.3at PoE equipment, protecting devices from being damaged by incorrect
installation
• Adjustable two different output voltage options (12V / 2A, 24V / 1A) to fit various devices
• Distance up to 100 meters

 

Industrial Case / Installation
• IP30 metal case protection
• DIN Rail and Wall Mount Design
• Supports EFT protection 6000 VDC for power line
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 Degree C operating temperature

 

Standard Compliance
• IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-TX
• IEEE 802.3ab 1000Base-T
• IEEE 802.3at High Power over Ethernet standard
• FCC Part 15 Class A, CE